Have we ever noticed the sound on the computer the first time we turned on?
And did you know that sound can give a warning to us about the state of our computer
These multiple meanings of the sounds generated:
1.There is no sound at all
There are 3 problems that might be going through a computer, first check whether the computer motherboard components installed have actually installed properly. Second, continue to examine the internal speaker on the motherboard is firmly in place, if installed correctly means there is a
possibility that internal speakers were damaged. Third, check the power supply, to know it works or not, see the power supply fan is spinning, or by touch, feel warm if your power supply indicating a healthy, if the fan is not spinning and cold temperatures can be sure power supply component has a problem.2.Beep beep once
Indicating all the components in a normal condition or not in a problem. But when you hear a beep once but the screen does not display any image, immediately check the monitor cable, if connected properly, if the computer graphics card is the possibility of using the monitor cable is incorrectly installed into the onboard graphics card port. If all is done but the screen is still not showing anything, check your graphics card or VGA cards in use and unplug the VGA, first clean the AGP slot or PCI motherboard using a toothbrush, second clean VGA card on the yellow sheet that will be embedded to the motherboard port using a pencil eraser. If you already replace the VGA and the monitor cable properly.
Indicating all the components in a normal condition or not in a problem. But when you hear a beep once but the screen does not display any image, immediately check the monitor cable, if connected properly, if the computer graphics card is the possibility of using the monitor cable is incorrectly installed into the onboard graphics card port. If all is done but the screen is still not showing anything, check your graphics card or VGA cards in use and unplug the VGA, first clean the AGP slot or PCI motherboard using a toothbrush, second clean VGA card on the yellow sheet that will be embedded to the motherboard port using a pencil eraser. If you already replace the VGA and the monitor cable properly.
3.Double beep sound
When you hear beep sound twice to indicate there is a computer component in normal conditions, but there are also some manufacturers that indicates that there is an error component, this depending on the type of motherboard used. Usually error beeps twice told the troubled condition of memory or graphics memory can also be a problem, check out both parts of this. to try to exchange the position of memory installed in another slot. If the VGA card unplug these components clean with a way above and reinstall them. Or you can also use the floppy disk but not in the bios setup floppy disk still gives a chance on condition enabled. The solution is disable the floppy disk and reboot the computer
When you hear beep sound twice to indicate there is a computer component in normal conditions, but there are also some manufacturers that indicates that there is an error component, this depending on the type of motherboard used. Usually error beeps twice told the troubled condition of memory or graphics memory can also be a problem, check out both parts of this. to try to exchange the position of memory installed in another slot. If the VGA card unplug these components clean with a way above and reinstall them. Or you can also use the floppy disk but not in the bios setup floppy disk still gives a chance on condition enabled. The solution is disable the floppy disk and reboot the computer
4.Beep three times
If it sounded three times on your computer, perform such checks on three points, because this error indicates that almost the same problem with the sound two times.
If it sounded three times on your computer, perform such checks on three points, because this error indicates that almost the same problem with the sound two times.
5.Beep four times
The problem lies in the computer timer that is not good or not functioning, it could be the problem lies in the CMOS is corrupted. Or just like a voice that sounded two-and three-times.
The problem lies in the computer timer that is not good or not functioning, it could be the problem lies in the CMOS is corrupted. Or just like a voice that sounded two-and three-times.
6.Beep five times
Usually indicates an error on the motherboard or memory, first clean the plates off the yellow memory memory using a pencil eraser, replace the memory and reboot your computer. If the beep code repeats, dislodged more memory and move it to another slot and then reboot again. If not solve the problem too, try to replace memory with others or damage is located on the motherboard.
Usually indicates an error on the motherboard or memory, first clean the plates off the yellow memory memory using a pencil eraser, replace the memory and reboot your computer. If the beep code repeats, dislodged more memory and move it to another slot and then reboot again. If not solve the problem too, try to replace memory with others or damage is located on the motherboard.
No comments:
Post a Comment